---

Setting up FanDraft to work with FanDraft WEB

STEP 1:
Click the DRAFT button. Then check the "Use FanDraft WEB" box.
(As seen in the figure on the right)

STEP 2:
You must VERIFY FanDraft WEB before it will work.
Enter in your credentials, then click the "Verify Login/Password" button.
If you entered your information correctly it will say "Verified!"

STEP 3: Once you start your draft, if everything is setup correctly and verified, you will see the "Web Status" text on your draft board. If it says "OK" that means that the picks are being uploaded. If you would like to see an "upload dialog box" during your draft, click on the small box icon next to the web status text. Click it again to shut it off at any time. You can also login into the FanDraft WEB site yourself to make sure everything is being uploaded correctly.

---

TROUBLESHOOTING

Data not being sent from FanDraft to WEB (online):

If you are having problems with the data uploading (connecting to the web from withing FanDraft), it may be due to a Firewall or poor internet connection. Make sure to turn off/correct these sort of things if you are having this problem.

The data seems to be sent, but updates not appearing on WEB:

Make sure that you do not have multiple browsers open at once. If this issue is occuring, try closing all of your browsers, then re-launching and re-logging into FanDraft WEB.

Note for Apple / Mac Virtual Machine users (i.e. Parallels, VM Fusion, Bootcamp)

If you are the one running the primary FanDraft software, and are using a Mac virtualization software (i.e. Bootcamp, Parallels, VM Fusion), you must use a Bridged Ethernet connection. If you notice that your draft results are not updating on the browser page, follow the instructions below:

Mac: Parallels
1. Click on "Configure"
2. On the left hand menu, under "Hardware", click "Network Adapter 1"
3. Select "Bridged Ethernet" (Default Adapter)